Features
It is a controller of extrusive RGB LED strips, 5 channel output, 3 channel RGB and the power supply with 2 channel. Installed with 22 changing patterns, it can be used for controlling patterns and changing speeds.

Technical Parameters
◆Output channel: 4 groups of RGB.
◆Output current: 3 RGB channels, 1A for each; channel VCC1 and channel VCC2, 9 A for each.
◆Function description: 22 changing patterns, such as jumpy changing, gradual changing, etc.

Changing Patterns
1.Red color section of odd numbers and of even ones light alternatively.
2.Red color section of odd numbers and of even ones light at the same time.
3.Green color section of odd numbers and of even ones light alternatively.
4.Green color section of odd numbers and of even ones light at the same time.
5.Blue color section of odd numbers and of even ones light alternatively.
6.Blue color section of odd numbers and of even ones light at the same time.
7.Cyan color section of odd numbers and of even ones light alternatively.
8.Cyan color section of odd numbers and of even ones light at the same time.
9.Yellow color section of odd numbers and of even ones light alternatively.
10.Yellow color section of odd numbers and of even ones light at the same time.
11.Purple color section of odd numbers and of even ones light alternatively.
12.Purple color section of odd numbers and of even ones light at the same time.
13.White color section of odd numbers and of even ones light alternatively.
14.White color section of odd numbers and of even ones light at the same time.
15.Sections of odd numbers and of even ones with 7 colors light jumpily.
16.All sections of 7 colors sections light jumpily.
17.Red color sections light gradually.
18.Green color sections light gradually.
19.Blue color sections light gradually.
20.Cyan color section light gradually.
21.Yellow color section light gradually.
22.Purple color section light gradually.
23.Red color sections, Green color section and Blue color ones light gradually.

Attention
◆To avoid the burning out of the controller, the average power of the 3 RGB channels
should not be over 70W to make sure the total power is less than 210W.
◆ The output driving of this controller is constant. The voltages of the driver and the
power supply are the same. Please choose appropriate DC power supply according
to the normally usable voltage of the lights. Otherwise, the lights will be burned out.
◆ Please use DC 24V as the power supply for the controller, instead of civilian ones with high voltage.