X-RibbonTM features 2-line high brightness SMD LEDs on a 16mm wide FPC board. Like other RFG flexible strips, X-RibbonTM runs 5 meters a reel and it stands out with the remarkably light output. With CCT 6000K each meter of X-RibbonTM gives more than 1,000 lumens meanwhile the whole strip gets no heat. Besides white color CCT 3000K, 4000-4500K and 6000K, other colors are also offered to customers. It definitely will be considered a good light source for signage, contour and canopy decorative purpose. X-RibbonTM is designed to be easily used by end users which has no professional technology at all. Consumers can cut the strip along the marks on PCB and do the join work again with our connector, so no any length of X-RibbonTM will be wasted. With our L- and T-shape connector consumers can install X-RibbonTM around the corners.
Basic technical data
Model NO. |
Color |
CRI |
LED type |
LED q’ty |
CCT |
Lumen /m |
Lux/m height 1m |
Voltage |
Current/reel |
Power consumption/reel |
RFG-XID-R |
Red |
N/A |
3528 SMD LED |
1200 |
N/A |
143 |
6.7 |
24V DC |
3.75A |
90W |
RFG-XID-Y |
Yellow |
125 |
6.2 |
3. 5A |
84W |
RFG-XID-G |
Green |
664 |
28.4 |
3. 3A |
79W |
RFG-XID-B |
Blue |
179 |
8.7 |
3. 5A |
84W |
RFG-XID-WW |
Warm white |
74 |
3000-3500K |
1174 |
53.1 |
3. 2A |
77W |
RFG-XID-NW |
Neutral white |
74 |
4000-4500K |
1203 |
53.6 |
3. 2A |
77W |
RFG-XID-W |
white |
74 |
5800-6500K |
1237 |
54.2 |
3. 2A |
79W |
- 5m as the standard packing length - Packing material is antistatic hot-sealing film bag - Cuttable every 6 LEDs (one line) - 3M adhesive tape on ribbon backside - Ribbon width 16mm - LED distance 8.3mm and cut section length 50mm.
Dimension drawing(Unit:mm)
Possible applications with X-RibbonTM - Cove lighting - Architectural lights for canopy, corridor, window, archway - Backlight or edge lighting for signage - DIY lights for home use- Path and contour marking - Decorative lights for holiday, event, show, exhibition
Accessories
Assembly Information -Solder connection should only be performed on designated solder pads (marked “ +/-”). During soldering, don’t exceed the maximum soldering time of 10 seconds and the maximum soldering temperature of 260 Celsius degrees. - The smallest unit (50mm - 6 LEDs) can be removed by cutting with scissors between the designated solder pads. - The mounting of the strip is facilitated by means of the double-sided adhesive on the back-surface of the strip. Care must be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt partide. The mounting substrate must have sufficient structural integrity. Take care to completely remove the adhesive backing. Once the strip is appropriately positioned. Press on the strip with about 20N/cm2 (refer to ap-plication techniques of 3M adhesive transfer tapes). - The minimum bending radius is 2 cm. The strip may be bent over a smaller radius of the circuit board contain-ing no electronic components and such bends should be made once and fixed in position to avoid cyclic fatigue.
Safety Information - The strip itself and all its components may not be mechanically stressed. - Assembly must not damage or destroy conducting paths on the circuit board. - Installation of LED ribbon (with power supplies) needs to be made with regard to all applicable electrical and safety standards. Only qualified personnel should be allowed to perform installations. - Correct electrical polarity needs to be observed. Wrong polarity may destroy the strip. - Parallel connection is highly recommended as safe electrical operation mode. - Serial connection is not recommended. Unbalanced voltage drop can cause hazardous overload and damage the strip. - Please ensure that the power supply is of adapters power to operate the total load. - When mounting on metallic or otherwise conductive surfaces, there needs to be an electrical isolation points between strip and the mounting surface. - Pay attention to standard ESD precautions when installing the strip. - Damaged by corrosion will not be honored as a materials defect claim. It is the user’s responsibility to provide suitable protection against corrosive agents such as moisture and condensation and other harmful elements.
RFG Limited Warranty RFG warrants this product (“Product”) against defects in material or workmanship for a period of three years from the date of purchase. If this Product is determined to be defective, RFG will repair or replace the Product, at its option. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of, or to any part of the Product. This warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or attempted repair by anyone than a facility authorized by RFG to service the Product.
Repair or replacement as provided under this warranty is the exclusive remedy of the customer. RFG shall not be liable for any incidental or consequential damages for breach of any express or implied warranty on this Product except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a partic ular purpose on this Product is limited in duration to the duration of this limited warranty.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Only RFG may change, amend or modify the terms of this Limited Warranty and any such change, amendment or modification shall be in writing and issued by RFG. To obtain warranty service and shipping information call +86 755 2910 0781 or e-mail china@rfg-light-led.com .You must provide proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the Product is within the warranty period to obtain warranty service. Consumers have legal rights under applicable national legislation governing the sale of consumer goods. Such rights are not affected by the warranties provision outlined in this document.
|