|
Part Number |
RFG-WC9 |
|
Fit for |
DigiRibbonTM ︳‖ |
|
Warranty |
3 years |
Features
- Meet DMX512(1990) protocol. Can be used as a DMX512 decoder.
- A LCD screen shows controller current working status.
- Wireless RF control is optional
- 20 normal color changing patterns and 1 DMX operating mode.
- 32 grayscale levels
- 60 speed adjustment levels for dynamic change
- Automatic parameter memory
- XLR3 Male and Female interface
- Aluminum housing with black wire drawing finish
Technical Parameters
Input Voltage: 12V DC
Input Signal: DMX512(1990)
Output Channel: 4 groups for simultaneous output
Dynamic color changing pattern
|
1) 7 color flows
- red color flows
- green color flows
- blue color flows
- yellow color flows
- Cyan color flows
- purple color flows
- white color flows |
2) 3 LEDs moves forward and reverse
- red moves backward
- red moves forward
- green moves backward
- green moves forward
- blue moves backward
- blue moves forward
- yellow moves backward
- yellow moves forward
- cyan moves backward
- cyan moves forward
- purple moves backward
- purple moves forward |
|
3) 3 LEDs moves forward and reverse, with color grounding
- red moves backward, with yellow grounding
- red moves forward, with yellow grounding
- green moves backward, with white grounding
- green moves forward, with white grounding
- blue moves backward, with green grounding
- blue moves forward, with green grounding
- yellow moves backward, with purple grounding
- yellow moves forward, with purple grounding
- cyan moves backward, with red grounding
- cyan moves forward, with red grounding
- purple moves backward, with blue grounding
- purple moves forward, with blue grounding |
4) 7 colors flow forward and reverse
- red flows backward
- red flows forward
- green flows backward
- green flows forward
- blue flows backward
- blue flows forward
- yellow flows backward
- yellow flows forward
- cyan flows backward
- cyan flows forward
- purple flows backward
- purple flows forward
- white flows backward - white flows forward |
|
5) colors flow from middle to 2 ends, then flow from 2 ends to middle
- red flows from middle to 2 ends
- red flows from 2 ends to middle
- green flows from middle to 2 ends
- green flows from 2 ends to middle
- blue flows from middle to 2 ends
- blue flows from 2 ends to middle
- yellow flows from middle to 2 ends
- yellow flows from 2 ends to middle
- cyan flows from middle to 2 ends
- cyan flows from 2 ends to middle
- purple flows from middle to 2 ends
- purple flows from 2 ends to middle
- white flows from middle to 2 ends - white flows from 2 ends to middle |
6) colors flow forward with other color grounding
- red flows with green grounding
- green flows with yellow grounding
- blue flows with cyan grounding
- yellow flows with red grounding
- cyan flows with green grounding
- purple flows with blue grounding - white flows with purple grounding |
|
7) colors flow backward with other color grounding
- red flows backward with green grounding
- green flows backward with cyan grounding
- blue flows backward with cyan grounding
- yellow flows backward with red grounding
- cyan flows backward with green grounding
- purple flows backward with blue grounding - white flows backward with purple grounding |
8) colors flow forward with grounding of the previous running color
- red flows forward without color grounding
- yellow flows forward with red grounding
- green flows forward with yellow grounding
- cyan flows forward with green grounding
- blue flows forward with cyan grounding
- purple flows forward with blue grounding
- white flows forward with purple grounding |
| 9) colors flow from middle to 2 ends then flow from 2 ends to middle, with other color grounding
- red flows from middle to 2 ends, with cyan grounding
- red flows from 2 ends to middle, with cyan grounding
- green flows from middle to 2 ends, with purple grounding
- green flows from 2 ends to middle, with purple grounding
- blue flows from middle to 2 ends, with yellow grounding
- blue flows from 2 ends to middle, with yellow grounding
- yellow flows from middle to 2 ends, with blue grounding
- yellow flows from 2 ends to middle, with blue grounding
- cyan flows from middle to 2 ends, with red grounding
- cyan flows from 2 ends to middle, with red grounding
- purple flows from middle to 2 ends, with green grounding
- purple flows from 2 ends to middle, with green grounding
- white flows from middle to 2 ends, without color grounding
- white flows from 2 ends to middle, without color grounding |
10) colors jumpy change
11) static red
12) static green
13) static blue
14) static yellow
15) static purple
16) static cyan
17) static white
18) 3 color dots run
19) 6 color dots run
20) automatic reply of the all 19 modes
21) DMX 512 control mode |
Set speed
The speed level range is 0-60. Bigger data responds to bigger speed.
Press key “SET” to find the speed-set interface. Adjust speed by pressing keys “UP” and “DOWN”.
After the speed is set, press “SET” twice or “MODE” to confirm and exit.
Set DigiRibbonTM length
The length range is 1-999 meters. Set the data according to the real length of DigiRibbonTM
Press key “SET” twice to enter the length-set interface. Set the length by pressing keys “UP” and “DOWN”.
Press “SET” twice again or press “MODE” to confirm the set then exit.
Set brightness
The brightness level range is 0-31. Bigger data responds to higher brightness.
Press key “SET” 3 times to enter the brightness-set interface. Adjust brightness by pressing keys “UP” and “DOWN”.
Press “SET” or “MODE” to confirm and exit.
Working with DMX512 console
1）Individual controller works with console
If the address code is set as X, the corresponding channels on console will be CHX to CH(X+3). CHX is for dynamic color changing patterns. CH(X+1) is for speed adjustment. CH(X+2) is for length-set and CH(X+3) is for brightness adjustment.
2) To achieve: Multiple controllers work with console. All controllers have the synchronous dynamic color changing patterns, speed and brightness adjustment.
If controller 1 address code is set as X, then the other controllers are also set as X. CHX on console will be responding to dynamic color changing and CH(X+1) responds to speed adjustment. CH(X+1) responds to speed adjustment. CH(X+2) is for length-set and CH(X+3) responds to brightness adjustment.
- To achieve: Multiple controllers work with console. Each controller has different dynamic color changing patterns and speed adjustment.
If controller 1 address code is set as X, then controller 2 will be set as X+4 and controller 3 set as X+8.
Safety Information：
- User should make sure the controller and running LED lights have the same working voltage 12V DC.
- This controller can only work with RFG DigiRibbon? series products.
- The controller is not water resistant so it is not allowed to be applied to outdoor circumstances.
- An extra 12V DC power supply is recommended to inter-connect DigiRibbon? every 5 meters so adequate power is provided for the light.
RFG Limited Warranty
RFG warrants this product (“Product”) against defects in material or workmanship for a period of three years from the date of purchase. If this Product is determined to be defective, RFG will repair or replace the Product, at its option. This warranty does not cover cosmetic damage or damage due to acts of God, accident, misuse, abuse, negligence, commercial use, or modification of, or to any part of the Product. This warranty does not cover damage due to improper operation or maintenance, connection to improper voltage supply, or attempted repair by anyone than a facility authorized by RFG to service the Product.
Repair or replacement as provided under this warranty is the exclusive remedy of the customer. RFG shall not be liable for any incidental or consequential damages for breach of any express or implied warranty on this Product except to the extent prohibited by applicable law, any implied warranty of merchantability or fitness for a particular purpose on this Product is limited in duration to the duration of this limited warranty.
Some states do not allow the exclusion or limitation of incidental or consequential damages, or allow limitations on how long an implied warranty lasts, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may have other rights which vary from state to state.
Only RFG may change, amend or modify the terms of this Limited Warranty and any such change, amendment or modification shall be in writing and issued by RFG. To obtain warranty service and shipping information call +86 755 2910 0781 or e-mail china@rfg-light-led.com You must provide proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the Product is within the warranty period to obtain warranty service. Consumers have legal rights under applicable national legislation governing the sale of consumer goods. Such rights are not affected by the warranties provision outlined in this document.
 |
|
